Material
Steel ( DIN-St12|ASTM-A366/A366M-97|JIS-SPCC ) +
Bronze ( CuFeNi ) +
Solid Lubricant ( MoS2 + Graphite )
Introduction
Self-lubricating bimetallic wear plates(steel/CuFeNi),made of low carbon steel as base material, are produced by the process of being sintered nickel iron bronze CuFeNi powder which distributed solid lubrication as layer. They are in conformity with the European RoHS environmental protection standards and widely used in the applications of mold and metallurgy due to the advantages of low friction coefficient, good self-lubricating, good corrosion resistance, high working temperature and good load capacity.
Usage
dry |
good |
oil lubricated |
good |
grease lubricated |
very good |
water lubricated |
good |
process fluid lubricated |
good |
Physical and Mechanical Properties
max. operating temperature |
+120 ℃ |
min. operating temperature |
-40 ℃ |
max. sliding speed coefficient-dry |
0.5 m/s |
max. sliding speed v-dry |
1.0 m/s |
max. sliding speed PV Factor-dry |
1.63 N/mm2·m/s |
max. sliding speed PV Factor-oil |
2.45 N/mm2·m/s |
Previous: IB073 Next: 没有了!